Svantek SV 971A - Record with the State of the Markers; Record with the Breaks in the Results Registration; Record with the Breaks Account PAUSE in the Results Registration; Record with the Wave File Name

SV 971A User Manual – Appendixes
203
B.2.1.2. Record with the state of the markers
The record with the state of the markers consists of one word:
<0x8nnn>
in which 12 bits nnn denote the state of the markers:
b11 = state of #12 marker
b10 = state of #11 marker
...
b1 = state of #2 marker
b0 = state of #1 marker
B.2.1.3. Record with the breaks in the results registration
The record with the breaks in the results registration consists of four words:
<0xB0ii> <0xB1jj> <0xB2kk> <0xB3nn>
in which ii, jj, kk, nn bytes denote 4-bytes counter of left or skipped records: nnkkjjii (ii is the least significant
byte, nn – the most significant byte).
B.2.1.4. Record with the breaks account PAUSE in the results registration
The record with the breaks in the results registration consists of four words:
<0xA0ii> <0xA1jj> <0xA2kk> <0xA3nn>
in which ii, jj, kk, nn bytes denote 4-bytes counter duration of PAUSE in milliseconds:
nnkkjjii (ii is the least significant byte, nn - the most significant byte).
B.2.1.5. Record with the wave file name
The record with the wave file name consists of six words:
<0xC2aa>
<0xccbb>
<0xeedd>
<0xggff>
<0xiihh>
<0xCAaa>
in which:
aa - size of records,
bb cc dd ee ff gg hh ii - 8-bytes name of wave file name