Svantek SVAN 958 - Page 6

SVAN 958 USER MANUAL _
iv
8.5.1 Selection of the working mode of <Shift> / <Alt> push-buttons - SHIFT MODE 8-5
8.5.2 Selection of the working mode of <Start / Stop> push-button - START/STOP 8-5
8.5.3 Locking the keyboard - KEYLOCK 8-6
8.6 Locking the MENU- MENU LOCK 8-6
8.7 Setting the reference signal in vibration measurements - REFERENCE LEVELS 8-7
8.7.1 Setting the reference level of the acceleration signal - ACC 8-7
8.7.2 Setting the reference level of the velocity signal - VEL 8-7
8.7.3 Setting the reference level of the displacement signal - DIL 8-7
8.8 Selection of detector’s type in the LEQ (RMS) calculations - RMS INTEGRATION 8-8
8.9 Programming of the instrument’s internal Real Time Clock - RTC 8-9
8.10 Selection of statistics levels to be saved in a file - STATISTICAL LEVELS 8-9
8.11 Programming of the instrument’s internal timer - TIMER 8-10
8.12 Selection the USB–HOST port functionality - USB–HOST PORT 8-11
8.13 Introduction the filter coefficients for 1/1 OCTAVE and 1/3 OCTAVE analysis –
USER FILTERS SETUP 8-12
8.13.1Selecting the mode for introduction of user filter coefficients - MODE 8-13
8.13.2Selecting the filter to be viewed, edited or cleared - FILTER 8-13
8.13.3Setting the coefficients of the user filters set - EDIT 8-13
8.13.4Clearing the coefficients of the user filters - CLEAR 8-14
8.14 Selection of the vibration units - VIBRATION UNITS 8-14
8.15 Warnings selection - WARNINGS 8-15
8.15.1Saving the measurement results in a file - RESULTS NOT SAVED 8-15
8.15.2Excluding channel from vector calculations - VECTOR SETTINGS 8-16
9 CALCULATION OF DOSE PARAMETERS - AUXILIARY FUNCTIONS 9-1
9.1 Selection of the calculation results - HAV CALCULATOR 9-1
9.1.1 Selection of the file with result of measurement - SELECT RESULTS 9-2
9.1.2 Selection of the partial results - PARTIAL EAV/ELV 9-3
9.1.3 Selection of the partial results - PARTIAL RESULTS 9-4
9.1.4 Selection of the daily exposure - DAILY RESULTS 9-4
9.2 Selection of the calculation results - WBV CALCULATOR 9-5
9.2.1 Selection of the file with result of measurement - SELECT RESULTS 9-5
9.2.2 Selection of the partial results - PARTIAL EAV/ELV 9-7
9.2.3 Selection of the partial results - PARTIAL RESULTS 9-7
9.2.4 Selection of the daily results - DAILY RESULTS 9-8