SVAN 958 USER MANUAL
iii
6 DATA AVAILABLE ON THE DISPLAY - DISPLAY 6-1
6.1 Selection of the modes of measurement results presentation - DISPLAY MODES 6-1
6.2 Selection of the parameters in graphical results presentations - DISPLAY SETUP 6-3
6.2.1 Selection of the scale in graphical results presentations - DISPLAY SCALE 6-4
6.2.2 Scaling of the vertical axis of the graphical presentation - DYNAMIC 6-4
6.2.3 Scaling of the horizontal axis of the graphical presentation - X–ZOOM 6-5
6.2.4 Selection of the parameters of the SPECTRUM - SPECTRUM VIEW 6-5
6.2.5 Selection of the weighting filters - TOTAL VALUES 6-6
6.2.5.1 Selection of the weighting filters for the profiles - FILTER 6-6
6.3 Checking the state of the internal battery - POWER SUPPLY 6-8
6.4 Setting the parameters of the display - SCREEN SETUP 6-8
6.4.1 Automatic switch off of the backlight - LIGHT TIMEOUT 6-9
6.4.2 Setting the brightness of the backlight - BRIGHTNESS 6-9
6.4.3 Setting the contrast of the display - CONTRAST 6-9
6.5 Checking specification of the instrument - UNIT LABEL 6-10
7 SAVING MEASUREMENT RESULTS - FILE 7-1
7.1 Saving files in the instrument’s memory - SAVE and AUTO NAME 7-3
7.2 Controlling the data storing in the instrument’s memory - SAVE OPTIONS 7-5
7.2.1 Saving files in RAM memory - RAM FILE 7-6
7.2.2 Controlling of the measurement statistics savings - SAVE STATISTICS 7-6
7.2.3 Saving minimum values in the spectrum - MIN SPECTRUM 7-6
7.2.4 Saving maximum values in the spectrum - MAX SPECTRUM 7-7
7.2.5 Replacement of the existing files by the new ones - REPLACE 7-7
7.2.6 Controlling of the measurement results savings - AUTO SAVE 7-8
7.2.7 Direct access to SAVE / AUTO NAME function - DIRECT SAVE 7-8
7.3 Loading the files with the measurement results - LOAD FILE 7-8
7.4 Checking the contents of the loaded file - LOGGER VIEW 7-10
7.5 Removing a file with the measurement results from memory - DELETE 7-11
7.6 Removing all files with measurement results from memory - DELETE ALL 7-13
7.7 Memory merging - DEFRAGMENTATION 7-14
7.8 Checking the contents of the memory - CATALOGUE 7-15
7.9 Checking the free space in the memory - FREE SPACE 7-16
7.10 Saving setup in the instrument’s memory - SAVE SETUP 7-17
7.11 Enabling of saving user filter option - SETUP OPTIONS 7-19
7.12 Loading the files with the configuration - LOAD SETUP 7-19
8 SETUP MENU - SETUP 8-1
8.1 Setting the language of the user interface - LANGUAGE 8-2
8.2 Return to the factory made settings - CLEAR SETUP 8-2
8.3 Day time limits selection - DAY TIME LIMITS 8-3
8.4 Selection of the extended mode - EXT. I/O SETUP 8-4
8.5 Selection of few push-buttons modes - KEYBOARD SETUP 8-5
To Next Page
Loading...
