SVAN 958 USER MANUAL
_
vi
FUNCTION list opened, MEASUREMENT FUNCTION selected (a) and MEASUR. FUNCTION sub-list
opened (b)..................................................................................................................................................... 3-32
Displays during the entering of the access code to a function.................................................................................. 3-32
Display after the unsuccessful verification of the access code................................................................................. 3-33
Scheme of the instrument memory organisation with the USB–HOST and memory stick connected..................... 3-34
Displays with the main list with FUNCTION text selected (a) and FUNCTION window with
MEASUREMENT FUNCTION selected (b) and CALIBRATION selected (c) ........................................... 4-1
MEASUREMENT FUNCTION window with all available functions ...................................................................... 4-1
Displays during the activation of the optional function ............................................................................................. 4-1
CALIBRATION windows in CHANNEL 1 .............................................................................................................. 4-2
CALIBRATION windows with the selected calibration mode and after entering this mode..................................... 4-3
CALIBRATION window with SENSITIVITY positions not accessible................................................................... 4-3
CALIBRATION window with the sensitivity greater than 50.0 mV / Pa and calculated calibration factor .............. 4-3
CALIBRATION window with the sensitivity smaller than 50.0 mV / Pa and calculated calibration factor.............. 4-3
CALIBRATION windows with the lowest possible sensitivity and the greatest calibration factor (a) and the
greatest sensitivity and the lowest calibration factor (b)................................................................................. 4-4
CALIBRATION windows with the selected calibration mode and after entering this mode..................................... 4-4
CALIBRATION windows with SENSITIVITY positions not accessible.................................................................. 4-4
CALIBRATION window during setting the sensitivity greater than 10.0 mV / ms
-2
................................................. 4-4
CALIBRATION window during setting the sensitivity smaller than 10.0 mV / ms
-2
................................................ 4-5
CALIBRATION windows with the lowest possible sensitivity and the greatest calibration factor (a)...................... 4-5
and the greatest sensitivity and the lowest calibration factor (b) ............................................................................... 4-5
CALIBRATION windows during the calibration measurement................................................................................ 4-6
CALIBRATION windows after the measurements and after the acceptance of the calibration factor value............. 4-6
CALIBRATION windows with the selected calibration mode and after entering this mode..................................... 4-7
CALIBRATION windows during and after the calibration measurements................................................................ 4-7
Confirmation of calibration result by pressing the <ENTER> push-button............................................................... 4-7
CALIBRATION window with CALIBRATION HISTORY text selected (a) CALIBRATION HISTORY
window opened with the last calibration result (b) ......................................................................................... 4-8
CALIBRATION HISTORY windows with the last calibration records.................................................................... 4-8
CALIBRATION HISTORY windows for the first (1) and fourth (4) channel .......................................................... 4-8
Main list with INPUT text selected............................................................................................................................ 5-1
INPUT list in LEVEL METER (a), in 1/1 OCTAVE analyser (b), 1/3 OCTAVE analyser (c), in
DOSIMETER (d) and in FFT analyser (e) ..................................................................................................... 5-1
Displays with not active sub-lists of INPUT list during the measurement................................................................. 5-1
MEASUREMENT SETUP window.......................................................................................................................... 5-2
MEASUREMENT SETUP windows; the setting of START DELAY with 1-second step ....................................... 5-2
MEASUREMENT SETUP windows; the setting of START DELAY with 10-seconds step.................................... 5-3
MEASUREMENT SETUP windows; the setting of INT. PERIOD with 1-second step ........................................... 5-3
MEASUREMENT SETUP windows; the setting of INT. PERIOD with 10-seconds step........................................ 5-3
MEASUREMENT SETUP windows; the setting of INT. PERIOD with 1-minute and 10-minutes step.................. 5-3
MEASUREMENT SETUP windows; the setting of INT. PERIOD with 1-hour and 10-hours step ......................... 5-3
Display, when the INTEGRATION PERIOD is too short for AUTO SAVE option................................................. 5-4
CYCLES NUMBER setting with the step equal to one............................................................................................. 5-4
CYCLES NUMBER setting with the step equal to 20............................................................................................... 5-4
MEASUR. SETUP windows, LOGGER STEP selection.......................................................................................... 5-5
Relations between INTEGR. PERIOD and LOGGER STEP.................................................................................... 5-5
INPUT list with CHANNELS SETUP selected and channel selection...................................................................... 5-6
CHANNEL 1 SETUP window in vibration mode ..................................................................................................... 5-6
CHANNEL 1 SETUP windows with MODE selection ............................................................................................. 5-6
CHANNEL 1 SETUP windows in VIBRATION MODE with RANGE selection.................................................... 5-7
CHANNEL 1 SETUP windows in SOUND MODE with RANGE selection............................................................ 5-7
CHANNEL 1 SETUP with PROFILE 1 text highlighted .......................................................................................... 5-7
CH x PROFILE y windows with the selection of the weighting filter in SM............................................................. 5-7
CHANNEL 1 SETUP windows with the selection of the weighting filter in acceleration measurements................. 5-8
CHANNEL 1 SETUP windows with the selection of the weighting filter in velocity measurements........................ 5-8
CHANNEL 1 SETUP windows with the selection of the weighting filter in displacement measurements ............... 5-8
CHANNEL x PROFILE y windows (SM) with the selection of the RMS detector................................................... 5-9
CHANNEL x PROFILE y windows (VM) with the selection of the RMS detector .................................................. 5-9
To Next Page
Loading...
