Sven PS-670 - Technical Specifications; Connecting an Additional Speaker

ENG
7
User Manual
PS-670, PS-680
TECHNICAL SPECIFICATIONS
Parameter, measurement unit Value PS-670/PS-680
Frequency response, Hz 45–22 000
Output power (RMS), W 65 (2 × 32.5)
Speaker diameter, mm Ø 70 + Ø 140
Battery capacity, mA*h 4 400 (2 pcs)
Power supply, V USB/
5V
Weight, g 4 150/4 350
Dimensions, mm 470 × 240 × 240
Notes:
• Technical specifications given in this table are supplemental information and cannot give
occasion to claims.
• Technical specifications and package contents are subject to change without notice due to
the improvement of SVEN production.
Technical support is on www.sven.fi.
Connecting an additional speaker
For models PS-670/680 you can connect an additional speaker (Bluetooth mode only):
•Turn both speakers into Bluetooth mode;
• Connect the signal source to one of the speakers via Bluetooth (the second column should
be in search mode);
• On the second (not connected) speaker, press and hold button TWS l. On display d the
inscription starts flashing TWS;
• If two speakers are successfully connected between themselves, the inscription TWS will glow
constantly.