Sven PS-710 - Remote Control and System Operation; Remote Control Functionality; Connection and Operation Overview

ENG
4
Party Speaker System
withBluetooth and FM-radio
o : Play/Pause button (short pressing in Player and Bluetooth mode); Start/Stop auto scan
(long pressing in Radio mode); Mute (short pressing in Radio and LINE IN mode); Disconnect
from device (long pressing in Bluetooth mode).
p
: next track (short pressing in Player and Bluetooth mode); Navigation on the track (long
pressing in Player and Bluetooth mode); Next station (short pressing in Radio mode); Search
forastation with a higher frequency (long pressing in Radio mode).
q VOLUME +/-: volume control knob.
Remote control
a
: switch backlight color; switch backlight mode.
b
: On/O button.
c EQ: EQ mode switch button.
d +/- : volume up/down.
e
: previous track (short pressing in Player and Bluetooth
mode); track navigation (long pressing in Player and Blue-
tooth modes); previous station (in Radio mode).
f TWS: Connecting an additional speaker.
g MODE: switching modes button: Bluetooth/Radio/Player/
LINE IN (short pressing); ON/OFF the service signals (long
pressing).
h 0-9: numeric pad for entering track number (in Player mode)
or number track/station (in Radio mode).
i REPEAT: Repeat mode selection button (in Player mode).
j
: Mute (short pressing); Turning on/o the backlight (long
pressing).
k BASS/TREBLE: Bass/treble level adjustment.
l
: next track (short pressing in Player and Bluetooth mode);
track navigation (long pressing in Player andBluetooth modes);
next station (in Radio mode).
m MIC: Microphone volume/Echo level adjustment (short
pressing); Enable microphone priority mode (long pressing).
n RESET: reset settings (long pressing).
o
: Play/Pause button (short pressing in Player andBlue-
tooth mode); Start/Stop auto scan (long pressing in Radio mode); Mute (short pressing in Radio
andLINE IN mode); Disconnect from device (long pressing in Bluetooth mode).
CONNECTION AND OPERATION
Attention! The built-in battery must be charged completely prior to the application.
Speaker system battery charging
• Connect speaker system to a charger. During battery charging the indicator b is red. Indicator
b will be light green when the battery is charged.
• The battery is used in the speaker system as an integral part of the device, therefore do nottry
toextract or replace it, because this can result in the warranty cancellation or the device damage.
OPERATION MODES
Bluetooth mode
• Wireless data transfer via the Bluetooth protocol enables to connect speaker system to com-
patible devises. Maximum radius of action of data transfer is 10 m. Such obstacles as walls oroth-
er electronic devices can interfere with the signal transfer.
• Turn on the speaker system Bluetooth mode — press button МODE k several times until
Fig.2.
a
b
c
d
e
d
f
g
h
i
j
k
l
o
m
n