EasyManua.ls Logo

Sven PS-730 - Player and Line-In Modes; Connecting an Additional Speaker (TWS); System Reset Procedure; Technical Specifications

Sven PS-730
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ENG
6
Party Speaker System
withBluetooth and FM-radio
Player mode
Attention! The le system of a micro SD carrier is FAT32. Maximum volume is 32 GB.
The system will enter the Player mode automatically when a carrier (USB ash or SD card) iscon-
nected to corresponding ports. Use button p to switch between Play/Pause modes. Youcan control
tracks by using buttons k (previous track) and q (next track).The use in the wired mode (LINE IN).
LINE IN mode
Speaker system can be used as an external device for amplifying any audio source witha3.5mm out-
put mini-jack. Connect a cable mini USB, plug 3.5 mini-jack to the audio input AUX f. Turn thespeak-
ers to the LINE IN mode — press the MODE button o several times until “LINE” appears on the display.
Connecting an additional speaker
For model PS-730 you can connect an additional speaker.
For TWS connection in Bluetooth mode:
Turn both speakers into Bluetooth mode (both speakers should be in search mode).
On another speaker press and hold button MENU i on control panel or TWS button f
onRemote control.
If two speakers are successfully connected between themselves, the master unit will display
“BLUE” constantly, the slave unit will display “SLAU”.
Connect the signal source via Bluetooth. Both speakers will appear in the search list as one
device.
For connection in other modes (FM radio/Player/LINE IN):
on any speaker, press and hold the MENU button i on the control panel or the TWS button
f on the remote control.
If two speakers are successfully connected to each other, the operating mode will be displayed
on the master device, and “SLAU” will be displayed on the slave device.
Reset
To reset the settings, long press the RESET n on remote control. Settings will reset.
TECHNICAL SPECIFICATIONS
Parameter, measurement unit Value
Frequency response, Hz 40–22 000
Output power (RMS), W 100 (2 × 50)
Speaker diameter, mm Ø 38 + Ø 145
Battery capacity, mA·h 4 400 (2 pcs)
Power supply, V
~230/50
, 9 V/1.5 A
Weight, g 5 000
Dimensions, mm 290 × 265 × 560
Notes. Technical specications given in this table are supplemental information andcannot give
occasion to claims. Technical specications and package contents aresubject tochange without
notice due to the improvement of SVEN production.
Technical support is on www.sven..

Related product manuals