Do you have a question about the SVS PB-2000 and is the answer not in the manual?
Guides placement for loudest bass or best balance of volume and accuracy.
Guides placement for best accuracy with moderate bass volume.
Adjusts loudness and signal delay for optimal soundstage and transition.
Manages crossover frequency and automatic power on/standby modes.
Enables automatic subwoofer activation from other system components.
Handles line-level connections and provides filtered outputs for speakers.
Controls main power operation and indicates amplifier status.
Details connecting the subwoofer to an AVR/PRO for bass management.
Explains line-level connections for multi-channel/stereo setups.
Lists frequency response, dimensions, weight, finish, and driver details.
Lists frequency response, dimensions, weight, finish, and driver details.
Details amplifier power, topology, standby mode, and controls.
| Impedance | 47 Ω |
|---|---|
| Subwoofer type | - |
| Subwoofer peak power | 1100 W |
| Subwoofer driver diameter | 304.8 mm |
| Subwoofer frequency range | 16 - 260 Hz |
| Subwoofer driver diameter (imperial) | 12 \ |
| Magnet type | Ferrite |
| Phase control | Yes |
| Product color | Black |
| Package weight | 37194.6 g |
| Power consumption (standby) | 0.5 W |
| Line inputs (RCA) | 2 |
| Sustainability certificates | RoHS |
| Subwoofer depth | 645.1 mm |
|---|---|
| Subwoofer width | 439.4 mm |
| Subwoofer height | 530.8 mm |
| Subwoofer weight | 29755.6 g |