SVS PB10-NSD - User Manual

O W NE R S ’
G UI D E
Contents:
 Chapter 2 Safety instructions
 Chapter 3 SVS Welcome
 Chapter 4 About your SVS subwoofer
 Chapter 5 General subwoofer features
 Chapter 6 Setup, integration, and calibration
 Chapter 7 Subwoofer specifications
 Chapter 8 Terms and Conditions
SV Sound
Last update: 27 April, 2008
SVS PB10-NSD Powered Box —
NSD 10” Woofer

Summary

Chapter 2 Safety Instructions

Important Safety Instructions Overview

Key instructions for safe operation, including handling, environment, and power.

Explanation of Safety Symbols

Details the meaning of the lightning flash and exclamation point warning symbols.

Chapter 5 General Subwoofer Features

Powered Box Common Features Overview

Explains essential features like Volume/Gain, Phase, Line In/Out, Auto-On, Power switch, and Fuse.

Chapter 6 Setup, Integration, and Calibration

Initial Setup: Unpacking and Placement

Guides on carefully unpacking the subwoofer and selecting an optimal room placement.

Subwoofer Connection and Hook-Up

Chapter 6-2 More Setup, Calibrating and Integration

Dual Subwoofer Configuration and Notes

Speaker Size and AVR Setup Guidance

Chapter 6-3 SV Sound

AVR Subwoofer Output and SPL Meter Setup

Calibration Process with Test Tones

Chapter 6-4 SV Sound

Setting Optimal Bass Levels and Measurement

Chapter 7 Subwoofer Specifications

SVS PB10-NSD Specifications

General

Driver Size	10 inches
Phase Switch	0 or 180 degrees
Amplifier Power	300 watts RMS
Inputs	Line-level RCA
Type	Ported Subwoofer
Low Pass Filter	50-160 Hz, 24 dB/octave