Do you have a question about the SVS PB-3000 and is the answer not in the manual?
Connect the subwoofer power cord to the subwoofer amplifier and directly into an AC outlet.
Connect the subwoofer to your AV receiver or preamplifier using a single RCA or XLR interconnect cable.
Connect stereo receiver or preamplifier outputs to the subwoofer's left and right inputs.
Automatically turn the subwoofer on/off when a signal is sent to the trigger input.
Integrate multiple subwoofers for improved frequency response and output.
Configure settings when using the subwoofer with an AV receiver or preamp.
Adjust settings for stereo systems without bass management.
Placing the subwoofer in a corner can reduce nulls but may cause boominess.
Placement in front of the room, near main speakers, for best blending.
Less common but effective for accuracy and output.
Recommended options for placing two subwoofers for optimal performance.
Control the subwoofer using a mobile app for advanced features and tuning.
Use the included remote for adjusting control settings with feedback.
Intuitive interface for adjusting most advanced subwoofer controls.
Setting bass level for balance, avoiding bloated sound.
Controls upper frequency cut-off to blend with main speakers.
Aligns arrival of output from speakers and subwoofers.
Reverses electrical polarity to fix bass nulls or boomy spots.
Removes peaks/dips and customizes output based on listening preferences.
Fixes bloated bass by optimizing low frequency output in small rooms.
Save up to three settings for movie, music, and custom content.
Custom tune by blocking ports for depth, quickness, or transient response.
Adjust standby mode, display settings, and reset subwoofer to factory defaults.
Device complies with Part 15 of FCC Rules for radio frequency energy.
Device complies with Industry Canada license-exempt RSS standards.
| Weight | 82.2 pounds |
|---|---|
| Subwoofer Type | Powered |
| Enclosure Type | Ported |
| Amplifier Power | 800 watts RMS (2500+ watts peak) |
| Ports | Dual |
| Inputs | RCA stereo |
| Outputs | RCA stereo |
| Wireless Connectivity | Optional SVS SoundPath Wireless Audio Adapter |
| Finish Options | Premium Black Ash |
| Frequency Response | 16-260 Hz ±3 dB |