CONNECTING & CONTROLLING YOUR SUBWOOFER
Control Settings for AV Receiver & Processor
If using your PB-3000 subwoofer with an AV Receiver or preamp with bass management, it is
recommended to leave all control settings in the default position, aside from the volume, which
allows you to adjust the level of output based on your personal preferences. Set the PB-3000
volume to -10 before running auto-set-up in the AV receiver/processor.
NOTE: Always re-run AV Receiver auto-set-up after moving the subwoofer to a di erent location to
ensure the acoustic distance and calibration levels are set correctly.
NOTE: If you want to run the subwoofer louder than the initial auto-set-up level, adjust the subwoofer
channel level upward in the AV receiver menu until you get the experience and performance you want.
An increase of 2-4 dB louder than initial set-up level is common for many customers. Volume can be
controlled from your mobile device via the Free SVS App, from the IR Remote Control, or using the
buttons on the front panel interface.
Please consult the Advanced Subwoofer Controls section of this owner’s manual or contact our
SVS Sound Experts if you have questions about any of the control settings.
www.svsound.com • custservice@svsound.com • (877) 626-5623
Control Settings for Stereo Receiver or Pre-Ampli er
Most Stereo Receivers and Pre-Ampli ers do not have bass management. Instead you will use
the Left and Right full-range outputs and make adjustments through the DSP ampli er on the
subwoofer.
Be sure to connect both Left and Right outputs to the Left and Right inputs on the subwoofer.
Set the Low Pass Filter to “On” and adjust the Crossover Frequency and Slope to achieve a
smooth blend and transition with the main speakers.
Once blended, adjust the Subwoofer volume to match the volume level of your main speakers.
For ner tuning, our
Merlin Subwoofer Selection Tool
provides the recommended low pass
lter frequency and slope setting for most loudspeakers on the market. Just choose your brand
and model of speakers from the menus and Merlin does the rest. It’s available 24/7, 365 at
www.svsound.com/merlin.
Our SVS Sound Experts are also standing by to help with any
connection or control questions you have about any of the controls or settings.
NOTE: Volume and low pass lter can be controlled from your mobile device via the Free SVS App, from
the IR Remote Control, or using the buttons on the front panel interface.
PB-3000
SUBWOOFER
owners manual
| page 11
To Next Page
Loading...
