EasyManua.ls Logo

SVS PB-3000 - Advanced Subwoofer Controls; Volume; Low Pass Filter; Phase Adjustment

SVS PB-3000
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ADVANCED SUBWOOFER CONTROLS
Volume
Setting the level too high will cause the bass to seem bloated and is the single most common
cause of bad sounding subwoofers. A rule of thumb is that the subwoofer should not draw
attention to itself, but should simply make the systems low end seem more extended and
accurate. Di erent content has di erent levels of output so adjust volume based on source
material and your personal preference.
Low Pass Filter
Enables smooth sonic transition and at frequency response between speakers and the
subwoofer. This allows you to control the upper frequency cut-o to blend with main speakers.
It also allows you to adjust slope, or the rate at which the low pass lter rolls o . If using an AV
Receiver with a Subwoofer Output, leave in the OFF position.
Phase Adjustment
Solves sound wave cancellation issues at speci c frequencies and perfectly aligns the arrival of
output from speakers and subwoofers to your listening position. Normally set to 0° if the
subwoofer is near the main speakers. Adjusting Phase shifts timing of the subwoofer output to
align with the main speakers or additional subwoofers.
Polarity
In some cases, reversing polarity solves dips or humps at the crossover frequency between a
subwoofer and speaker and can be used to x bass nulls or overly boomy spots in the listening
area. Reversing the electrical polarity of the subwoofer ampli er makes it so the woofer moves
in when speaker drivers move out and is normally set to positive
Parametric EQ
Powerful tool for removing peaks and dips in your listening area, and for creating custom
subwoofer output based on personal listening preferences. Works best when used with acoustic
measurements.
Allows you to set the desired center frequency of the lter, increase or decrease the SPL dB of the
lter, or adjust the bandwidth of the lter.
Room Gain Compensation
Fixes bloated sounding bass by optimizing low frequency output and extension when too much
sound wave density is being created by a small room.
PB-3000
SUBWOOFER
page 16 |
owners manual

Other manuals for SVS PB-3000

Related product manuals