EasyManua.ls Logo

SVS PB17-Ultra R Evolution - Page 9

SVS PB17-Ultra R Evolution
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CONNECTING & CONTROLLING YOUR SUBWOOFER
Control Settings for AV Receiver & Processor
If using your PB17-Ultra R|Evolution subwoofer with an AV Receiver or preamp with bass
management, it is recommended to leave all control settings in the default position, aside from
the volume, which allows you to adjust the level of output based on your personal preferences.
NOTE: Always re-run AV Receiver auto-set-up after moving the subwoofer to a dierent location to
ensure the acoustic distance and calibration levels are set correctly.
NOTE: If you want to run the subwoofer louder than the initial auto-set-up level, adjust the subwoofer
channel level upward in the AV receiver menu until you get the experience and performance you want.
An increase of 2-4 dB louder than initial set-up level is common for many customers. Volume can be
controlled from your mobile device via the SVS Subwoofer Control App or using the controls on the rear
panel interface.
Please consult the Advanced Subwoofer Controls section of this owner’s manual or contact our
SVS Sound Experts if you have questions about any of the control settings.
www.svsound.com • custservice@svsound.com • (877) 626-5623
Control Settings for Stereo Receiver or Pre-Amplier
Most Stereo Receivers and Pre-Ampliers do not have bass management. Instead, you will use
the Left and Right full-range outputs and adjust through the DSP amplier on the subwoofer.
Be sure to connect both Left and Right outputs to the Left and Right inputs on the subwoofer.
Set the Low Pass Filter to “On” and adjust the Crossover Frequency and Slope to achieve a
smooth blend and transition with the main speakers.
Once blended, adjust the Subwoofer volume to match the volume level of your main speakers.
For ner tuning, our Subwoofer Matching Tool provides the recommended low pass lter
frequency and slope setting for most loudspeakers on the market. Just choose your brand and
model of speakers from the menus and the tool does the rest. It’s available 24/7, 365 at
www.svsound.com/merlin. Our SVS Sound Experts are also standing by to help with any connec-
tion or control questions you have about any of the controls or settings.
NOTE: Volume and low pass lter can be controlled from your mobile device via the SVS Subwoofer
Control App or using the buttons on the rear panel interface.
PB17-Ultra R|Evolution
SUBWOOFER

Related product manuals