Streaming with Bluetooth
1. Your Prime Wireless Pro Powered Speakers will automatically enter into pairing mode when you
select Bluetooth as a source until you pair a device to them.
2. The OLED display will indicate [Bluetooth Ready to Pair] and the blue LED on the rear panel will
flash. The product will remain in pairing mode for about 60 seconds.
3. In the Bluetooth Settings menu on your smartphone, tablet, or PC select “SVS Prime Wireless Pro
Powered Speakers”
4. When Bluetooth is paired, the blue LED on the rear of the product will stop blinking and remain
solid. The OLED display will show the Bluetooth Logo and the name of the device that is paired
and connected
5. To enter into pairing mode manually or to pair additional devices, tap the Bluetooth Setup button
on the rear panel or press and hold the Bluetooth button on the remote for 3 seconds and
follow step 3 above.
6. To start streaming, select Bluetooth as your source on the Prime Wireless Pro Powered Speakers
(if not already selected), choose the music you want to stream and then press play!
Connecting Via HDMI, Line In, 3.5mm AUX, and Optical Inputs
Your Prime Wireless Pro Powered Speakers is equipped with multiple input connections that allow it to provide wired
audio playback from a wide array of devices, including: computers, TVs, AV receivers, Blu-ray players, gaming consoles,
handheld devices, turntables with phono preamps and more. Connecting these devices to your Prime Wireless Pro
Powered Speakers is as simple as plug-and-play.
1. Ensure the device you want to connect has the appropriate HDMI ARC, HDMI eARC, Line out, or
optical output.
2. Check to see that you have the proper HDMI, optical, stereo RCA or stereo 3.5mm cable (not
included) for connecting your device and the Prime Wireless Pro Powered Speakers.
3. Connect your device to the HDMI input, Optical input, L/R RCA Line In stereo inputs or the 3.5mm
input on your Prime Wireless Pro Powered Speakers.
To Next Page
Loading...
