For connection to a Stereo Receiver or Preamplifier
without auto-set-up, adjust the SB-2000 PRO volume
to match the output of your main speakers, and
adjust the low pass filter to blend the bass between
the SB-2000 PRO and your speakers. If needed,
consult with our Sound Experts on the best phase
setting.
For additional guidance on recommended crossover or low pass filter settings specific to your system,
visit our Subwoofer Matching Tool at www.svsound.com/merlin, or just call, email or chat online with
our Sound Experts:
(877) 626-5623 | custservice@svsound.com | www.svsound.com
For connection to an AV Receiver, set the SB-2000 PRO volume to -10 in the app (on
the rear panel, all but the last two lights illuminated). Set the low pass filter to LFE
and the phase to 0 degrees, then run auto-set-up on the AV Receiver. Always re-run
set-up if you move the subwoofer to another location.
The rear panel features an intuitive all-new user interface with controls for adjusting the subwoof-
er’s primary settings. The blue LED bar shows settings for Volume, Low Pass Frequency, and Phase.
Simply press the setting you want to change and then use the “+” and “-” buttons to adjust the
settings.
Please note, some DSP settings can only be accessed using the SVS app.
The SVS App is the easiest and most convenient
way to access all of the advanced control features
available on your SB-2000 PRO, from the comfort
of your favorite seat.
Unbox It
Quick Start Guide
SB-2000 PRO
Get Control
Get Calibrated
HOME / VOLUME
MOVIE
PRESET
LOW PASS FILTER
OPTIONS
-22
10050
20 40
200
0
6
4
2
0
-2
-4
-6
-8
-10
-12
PEQ1
ACTIVE
PEQ2
ACTIVE
PEQ3
DISABLED
BOOST: 0 dB
Q FACTOR: 1.2
FREQ: 200
Hz
PARAMETRIC EQ
AUTO EQ - START
MIC INPUT
If you followed the SB-2000 PRO Subwoofer unboxing instructions properly
you will have the following items in front of you. Please confirm all pieces are
available before continuing.
Congratulations on choosing the SVS SB-2000 PRO, one of the most powerful and advanced
subwoofers in the world. We know you’re anxious to get it cranking so the following steps will
guide you through the quick and easy installation process.
We strongly recommend reading the SB-2000 PRO Owner’s Manual to get the best possible
performance out of your new subwoofer. You’ll find useful information about subwoofer
placement, connections, DSP functions and more. The full SVS SB-2000 PRO Owner’s Manual can
be found here: www.svsound.com/sb-2000pro-manual
Your SVS SB-2000 PRO Subwoofer can be controlled from the new SVS Mobile
App or via the rear panel for maximum flexibility when optimizing performance
based on your room layout, speakers, system set-up and more.
Download The App
On The Subwoofer
For iOS & Android Devices
[SB-2000 PRO Subwoofer] [Removable Grille]
[Detachable Power Cord]
R
3V-12V | AC/DC
100V-120V ~ 50-60Hz 800W
L
LINE LEVEL
INPUT OUTPUT
SVS SOUNDPATH WIRELESS
AUDIO ADAPTER
LFE
+
VOL
LOW
PASS
LOW PASS
PHASE
PHASE
0°
90° 180°
30Hz 40Hz 60Hz 90Hz 140Hz LFE
_
AUTO / ON
UP (+)
LOW PASS FREQUENCY
PHASE
VOLUME
DOWN (-)
REG
ISTER
Register Your
New SVS Product:
Thank you for choosing SVS! Registering your SVS product expedites any Sound Experts
support requests, confirms your warranty registration and provides a proof of purchase.
Plus, as a registered customer, you’ll be the first to get SVS news and updates.
Register your product now at: www.svsound.com/register
To Next Page
Need help?
General
