Need help?Do you have a question about the SVS SB-2000 and is the answer not in the manual?
Adjusts how loud the subwoofer plays. Set to 10-12 o'clock for AVR auto-setup.
Delays signal to align with loudspeakers. Set to 0° for AVR, adjust for 2-channel.
Sets upper frequency limit (50-160 Hz or LFE). Blend with speakers for 2-channel.
Enables automatic power-on with signal or keeps unit continuously powered.
Automatically turns on subwoofer from standby via trigger signal from other components.
Used for connecting audio sources via RCA cables, LFE for mono, L/R for stereo.
Used in 2-channel setups to high-pass signal to loudspeaker amplifier.
Turns the amplifier on and off. Should be off for extended non-use or connections.
Accepts the AC power cord for connecting to mains power.
Front panel indicator showing amplifier status: blue for on, red for standby.
Connects AVR/PRO via RCA to subwoofer's LFE input for bass management.
Connects pre/pro L/R outputs to subwoofer for multi-channel or stereo audio.
General| Driver Size | 12 inches |
|---|---|
| Amplifier Power | 500 watts RMS (1100 watts peak) |
| Enclosure Type | Sealed |
| Frequency Response | 19-220 Hz ±3 dB |
| Weight | 35 lbs |
| Inputs | RCA line-level inputs |
| Outputs | Stereo RCA (passthrough) |
To Next Page
