Need help?Do you have a question about the SVS SB13-Ultra and is the answer not in the manual?
Connect A/V receiver LFE output to subwoofer's Low Level Line in. Set switches to Normal and Auto.
Connect power cord to subwoofer and AC outlet. Set main power switch to ON (I).
Run A/V receiver auto-setup and confirm speaker/subwoofer crossover settings.
Connect pre-amp outputs to subwoofer inputs for stereo configuration and level matching.
General| Impedance | 24 Ω |
|---|---|
| Subwoofer type | - |
| Subwoofer peak power | 3600 W |
| Subwoofer driver diameter | 330.2 mm |
| Subwoofer frequency range | 20 - 460 Hz |
| Subwoofer driver diameter (imperial) | 13.5 \ |
| Material | MDF |
| Magnet type | Ferrite |
| Product color | Black |
| Voice coil type | Aluminum |
| Package weight | 47627 g |
| Sustainability certificates | RoHS |
| XLR in | Yes |
| Line inputs (RCA) | 1 |
Weight and Dimensions| Subwoofer depth | 518.2 mm |
|---|---|
| Subwoofer width | 442 mm |
| Subwoofer height | 454.7 mm |
| Subwoofer weight | 41730 g |
To Next Page
