The Swann DIY Weatherproof Cam Security Camera is a cost effective security solution that is
ideal for areas subject to dust, rain or other wet conditions.
Easy to install and use, the camera plugs straight into your TV, VCR, DVR or security monitor and
features a high quality black & white lens and built-in sensitive microphone. The camera also
has infra-red LEDs (invisible light beams) allowing you to monitor at night or areas with little light.
The Swann DIY Weatherproof Cam now also features motion detection to assist with theft deter-
rence, retaining evidence and all hours surveillance.
Weatherproof Cam
B&W Security Camera
with Motion Detection
Day/Night
Technical Specifications
Waterproof Parameters
Camera Sensor: 1/3"/8.5mm B&W CMOS
TV System: PAL/CCIR (AU, UK, EC)
NTSC/EIA (USA)
Effective Element: PAL: 628*582 NTSC: 510*492
Definition: 380 TV Lines
Scanning frequency: PAL/CCIR: 50HZ
NTSC 60HZ
Minimum Illumination: 0 Lux (B & W)
Signal Noise Ratio: >+40dB
Electronic Shutter: 1/60~1/15000second
Noise: <0.03% Peak Value
Power Supply: 8V ~ 12V DC 300mA
Infra-red Range: 2-3M/6-9feet
View Angle: 40°
IR Power Control: CDS Light Sensor
Power Consumption: 1.5 Watts
IR Power: <10 Lux / CDS Inactive
>15 Lux / CDS Active
Construction: High Impact Plastic
Operation Temperature: -10° C+50° C
Package Contents
B/W Weatherproof Camera with 70ft/22m Cable
Power Adaptor
Instruction Manual
To Previous Page
Loading...
