Swegon GLOBAL PX User Manual

31
Operation and maintenance instructions
BASIC SETUP
.. BASIC SETUP
When the air handling unit is started up for the rst time, the
commissioning menu is automatically displayed. At the very end
of the commissioning (menu) the commissioning of the unit has
to be conrmed by the service technician. Once the commis-
sioning has been conrmed, the commissioning menu will not
be displayed as rst menu any more. The commissioning menu,
however, will remain accessible through the advanced setup. See
Section ...
Language
The language desired can be set here. The language setting can
be changed at any time in the basic setup menu.
Setting Settings
range
Factory
setting
Language Languages as
displayed
English
LANGUAGE
UNITS
AIRFLOW REGULATION
TEMPERATURE
FIRE ALARM
BASIC SETUP
Units
The desired unit can be set here. The unit setting can be changed
at any time in the basic setup menu.
Setting Settings
range
Factory
setting
Unit m³/h
l/s
m³/h
LANGUAGE
UNITS
AIRFLOW REGULATION
TEMPERATURE
FIRE ALARM
BASIC SETUP
LANGUAGE
UNITS
AIRFLOW REGULATION
TEMPERATURE
FIRE ALARM
BASIC SETUP
Airow regulation
The desired control mode can be set here. The setting can be
changed at any time in the basic setup menu. Depending on
the selected function, ows can be set as (l/s, m³/h), pressure
(Pa), input signal strength (%) or torque (%). For both “Airow
control” and “Torque control”, three setpoints are available: Low,
medium and high.
Setting Settings
range
Factory
setting
Operating mode OFF
Airow
Demand control
Pressure
Torque
Airow

Swegon GLOBAL PX Specifications

General

Brand	Swegon
Model	GLOBAL PX
Category	Air Handlers
Language	English