Need help?Do you have a question about the Swegon GOLD RX 12 and is the answer not in the manual?
Details the location and use of safety isolating switches for different unit sizes.
Warns about risks associated with rotating parts and opening doors.
Explains the role of safety guards and who can remove them.
Provides safety instructions for handling glycol.
Outlines the general sequence for commissioning the air handling unit.
Lists the order for adjusting air devices, branch ducts, and main ducts.
Provides a step-by-step guide for adjusting air devices and dampers.
Explains the importance of pressure balance for correct heat exchanger operation.
Details settings for ERS, Supply Air, and Extract Air regulation.
Explains settings for low, high, max, and min/max fan speeds.
Details the process for calibrating filters.
Explains ERS, Supply air, and Extract air regulation modes.
Allows individual selection of regulation type for supply and extract air fans.
Maintains a constant airflow by automatically regulating fan speed.
Varies airflow to maintain constant pressure in the ducting.
Details heat exchanger functions.
Protects the rotary heat exchanger from frosting by monitoring pressure drop.
Limits exhaust air temperature by controlling rotor speed.
Details various cooling regulation modes (CoolDX, Stepless, On/off).
Controls supply air moisture by switching cooling/postheating coils.
Details the factory-preset time delays for unit startup steps.
Activates heating to maintain coil temperature and prevent freezing.
Configures external and internal fire alarms and fan behavior during fire events.
Details factory-preset alarm limits for temperature, filters, and heat exchangers.
Instructions for removing and fitting new filters.
Provides cleaning instructions for rotary, plate, and coil heat exchangers.
Explains how alarms are indicated and how to trace faults.
Details safety isolating switches and fuses within the electrical cubicle.
To Next Page
General