Need help?Do you have a question about the Swegon GOLD RX Series and is the answer not in the manual?
General guidelines and safety precautions for installing the air handling unit.
Instructions for transporting the unit safely within the installation site.
Details on parts packed with or ordered alongside the air handling unit.
Specifications for mounting the unit on a stable, horizontal supporting surface.
Information on how the unit is delivered and its various sections.
Methods for safely lifting the unit using forklifts or cranes.
Step-by-step guide for assembling the heat exchanger unit section.
Instructions for removing fan transport locking devices before operation.
Overview of available unit versions and fan arrangement configurations.
Procedure for joining the different sections of the air handling unit.
Guidelines for connecting air handling unit sections to ducts using slip-clamps.
Steps for installing the supply air temperature sensor within the supply air duct.
Wiring motor switches and communication cables for GOLD CX models.
Instructions for wiring the incoming power supply to the safety isolating switch.
Methods for routing external control and communication cables through the unit.
Details on installing the pipework package for GOLD CX units.
Detailed dimensional data for GOLD RX 100/120 models, including weights.
Detailed dimensional data for GOLD CX 100/120 models, including weights.
Detailed list of terminal functions, connections, and remarks for the control unit.
To Next Page
General