EasyManua.ls Logo

Swegon GOLD PX - User Manual

Swegon GOLD PX
196 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
GB.GOLDSKE.160901
www.swegon.com 1
We reserve the right to alter specifi cations without notice.
OPERATION AND MAINTENANCE INSTRUCTIONS FOR THE
GOLD RX/PX/CX/SD, GENERATION E
Applicable to program version 1.20 and newer versions
GOLD RXGOLD PX
The document was originally written in Swedish.
GOLD CX GOLD SD

Table of Contents

Other manuals for Swegon GOLD PX

Questions and Answers

  • J
    Jason DavisSep 23, 2025
    What to do if Swegon Air Handlers show pre-heat temperature sensor defective?
    • B
      Blake JonesSep 23, 2025
      If the sensor is defective or not connected, select reset in the alarm log.
  • D
    dawnortizAug 25, 2025
    What to do if Swegon Air Handlers show external fire alarm no. 2 tripped?
    • K
      Kyle ClarkAug 25, 2025
      Select reset in the alarm log.
  • D
    Deborah MatthewsAug 25, 2025
    What to do if Swegon Air Handlers show internal fire alarm tripped?
    • N
      nancy55Aug 26, 2025
      Select reset in the alarm log.
  • C
    Cheryl RobertsonAug 27, 2025
    What to do if Swegon Air Handlers show external alarm no. 1 tripped?
    • A
      Anthony WoodsAug 27, 2025
      Select reset in the alarm log.
  • W
    Willie YoungSep 23, 2025
    Why Swegon Air Handlers show plate heat exchanger defrosting sensor no. C communication error?
    • D
      Dustin BradleySep 23, 2025
      The air handling unit’s control unit cannot establish correct communication with defrosting sensor C for the heat exchanger. Select reset in the alarm log.
  • M
    michaeljordanSep 13, 2025
    Why Swegon Air Handlers show coil heat exchanger, I/O-module no. 1 communication error?
    • P
      Patricia Hanson MDSep 13, 2025
      The air handling unit's control unit cannot establish correct communication with I/O module No. 1 for coil heat exchanger. Select reset in the alarm log.
  • C
    Corey RichardSep 12, 2025
    Why Swegon Air Handlers show humidification I/O module no. 4 communication error?
    • L
      Logan SantosSep 12, 2025
      The air handling unit's control unit cannot establish correct communication with I/O module No. 4 for humidity. Select reset in the alarm log.
  • C
    Christopher BarajasSep 12, 2025
    Why Swegon Air Handlers show plate heat exchanger, I/O-module no. 2 communication error?
    • M
      matthew08Sep 12, 2025
      The air handling unit's control unit cannot establish correct communication with I/O module No. 2 for plate heat exchanger. Select reset in the alarm log.
  • S
    sheribraySep 4, 2025
    What to do if Swegon Air Handlers show extra regulation sequence 2 valve monitoring tripped?
    • D
      Danny HarrisonSep 4, 2025
      If the valve actuator, air heater for water is defective, select reset in the alarm log.
  • J
    Janet GuerraSep 2, 2025
    What to do if Swegon Air Handlers show pre-heat frost guard tripped?
    • D
      Daniel MitchellSep 2, 2025
      Select reset in the alarm log.

Swegon GOLD PX Specifications

General IconGeneral
Filter bypass leakageF9
Mechanical resistanceD1
PowerVaries depending on configuration
Frequency50 Hz
Protection classIP54
WeightVaries with model size

Related product manuals