Need help?Do you have a question about the Swegon GOLD PX Series and is the answer not in the manual?
Details the microprocessor-based, integrated control system that manages unit functions.
Outlines the specific components of the air handling units with diagrams.
Details the location and use of the safety isolating switch for different unit sizes.
Highlights risks associated with rotating parts and opening inspection doors during operation.
Explains the function of safety guards and who is qualified to remove them.
Outlines the step-by-step sequence for initial unit commissioning.
Details the procedure for adjusting ducting and air devices for optimal airflow.
Explains how to adjust pressure balance in the unit, especially for rotary heat exchangers.
Details the components, buttons, display, and abbreviations of the hand-held terminal.
Covers temperature readings, ERS regulation, supply/extract air regulation, and Xzone settings.
Details temperature regulation, compensation, night modes, boost, and sensor functions.
Explains ERS, Supply Air, and Extract Air regulation modes and their sequences.
Explains fan regulation, airflow compensation, boosting, and slave fan adjustments.
Details cooling operation, regulation types, and dehumidification control methods.
Allows setting alarm limits for temperature, filters, heat exchangers, and service periods.
Provides instructions on removing, fitting, and calibrating filters, and ordering new ones.
Lists and describes all alarm numbers, texts, priorities, stops, indications, delays, and resetting.
Details terminal connections and their functions for sizes 04-80, including Ethernet and EIA.
To Next Page
General
