S
sheribraySep 4, 2025
What to do if Swegon Air Handlers show extra regulation sequence 2 valve monitoring tripped?
- DDanny HarrisonSep 4, 2025
If the valve actuator, air heater for water is defective, select reset in the alarm log.
To Next PageTo Next PageWhat to do if Swegon Air Handlers show extra regulation sequence 2 valve monitoring tripped?
If the valve actuator, air heater for water is defective, select reset in the alarm log.
What to do if Swegon Air Handlers show external fire alarm no. 1 tripped?
Select reset in the alarm log.
What to do if Swegon Air Handlers show pre-heat frost guard tripped?
Select reset in the alarm log.
What to do if Swegon Air Handlers show extra regulation sequence 2 frost guard tripped?
If the frost guard temperature sensor measures a temperature less than the preset alarm limit, select reset in the alarm log.
What to do if Swegon Air Handlers show extra regulation sequence 1 frost guard tripped?
If the frost guard temperature sensor measures a temperature less than the preset alarm limit, select reset in the alarm log.
What to do if Swegon Air Handlers show supply air humidity sensor defective?
If the humidity sensor in the supply air duct is defective or not connected, select reset in the alarm log.
What to do if Swegon Air Handlers show coil heat exchanger temperature sensor defective?
If the temperature sensor on the coil heat exchanger’s pipework package for the frost guard is defective or not connected, select reset in the alarm log.
What to do if Swegon Air Handlers show external alarm no. 2 tripped?
Select reset in the alarm log.
What to do if Swegon Air Handlers show external alarm no. 1 tripped?
Select reset in the alarm log.
What to do if Swegon Air Handlers show internal fire alarm tripped?
Select reset in the alarm log.
General| Filter bypass leakage | F9 |
|---|---|
| Mechanical resistance | D1 |
| Power | Varies depending on configuration |
| Frequency | 50 Hz |
| Protection class | IP54 |
| Weight | Varies with model size |
