SWELLPRO SPLASH DRONE - Advanced Features and Accessories; Smart Ground Station and App Control

©2016 SwellPro All Rights Reserved
26
Transmitter
2.4GHz Bluetooth Datalink
The bluetoothdatalink module include 2 parts: Transmitter terminal and Receiver terminal. The
on-board transmitter terminal connects to the "TX" & "RX" channel of ight controller, and communicate
with the on-ground receiver terminal via 433MHz/915MHz wireless signal.
Note: If the ying area does not have internet access, you might need to download the goggle map data
of the ying area on your smartphone prior to take o.
Remark: The 3 color codedcable (black/red/green) shall plug into "TX" pin, and the single white cable
goes to "RX" pin, as pictured above.
1. Download the Android APK at www.swellpro.com, or download swellpro APP in APPLE store for your
iPhone.
2. Run swellpro APP, click “GPS coordinate” to nd the current location and choose a safe ying area.
4.5.1.2 Use the Smart Ground Station
LEFT
Flight Data
Flight Data
Connection
Mission Planning
GPS Coordinate
GPS Specic
Coordinate
Return-To-Home
Taking-o
Landing
Ascending
Hovering
More
Splash Drone &
Nose Direction
Battery
Voltage
Latitude &
Longitude