swepac FB 430 - Centrifugal Clutch Belt Adjustment; Belt Replacement via Clutch; Tightening Belt with Clutch; Set Screw Tightening Reminder

14
FB 430 / FB 450 / FB 500 / FB 510
Dok: 101498D-GB 2103
To replace the belt, follow instructions on
the picture and turn the outer part of the
centrifugal clutch counterclockwise.
Hold with hook wrench according to the
image and in order to tighten the belt,
rotate the outer part of the centrifugal
clutch clockwise
The centrifugal clutch is divisible
39 mm
Reassemble in reverse order.
NB! Do not forget to tighten the three set
screws