The Vibe-Lite Switch is a durable and easy-to-use assistive technology device designed for users with special needs, offering a range of features for cause-and-effect learning and controlling external equipment or switch-adapted toys.
Function Description:
The Vibe-Lite Switch is an electronic switch with hidden features, allowing it to control external equipment or switch-adapted toys. It incorporates three in-built programs: Momentary/Direct, Latched, and Timed, which are recognized as foundational for cause-and-effect learning. The device provides tactile feedback through in-built vibration and visual feedback via an illuminated switch pad. Users can connect their favorite toy, select a program (Momentary, Latch, or Timed), and then decide whether to activate the vibration or lights.
Important Technical Specifications:
- Battery Type: 2 x AA @ 1.5V each.
- Jack Plug: 3.5 mm 2 pole (Mono).
- Relay Type: DC 3V - Normally Open - Volt free contact.
- Mounting Plate: Screw M4, no longer than 16 mm.
- Switch Pad Activation Weight: 88 grams.
- Switch Weight: 128 grams.
- Size: 112 mm diameter x Height 38 mm.
- Compliance: EN 62115:2005 Electrical Toy safety, CE/EN 61000-6-3:2007 – EMC RoHS.
- Internal Relay: Uses an internal volt-free N/O (Normally Open) relay for flexible control of various toys and equipment.
Usage Features:
- Turning On: Flip the Vibe-Lite over, locate the toggle switch on the underside, and slide it to the "On" position. To turn off, slide it back to the original position.
- Connecting to Toys: Most switch-adapted toys with a 3.5 mm jack socket will work. For toys with a 6.3 mm jack socket (1/4 inch), a jack adapter will be required.
- Program Selection:
- Momentary/Direct: The output operates only while the switch pad is pressed. This is selected by ensuring Dip switches 1, 2, 3, 4, and 5 are all in the "Off" position.
- Latched: The switch operates indefinitely until a second press is used to turn it off. This is selected by setting Dip switch 1 to "On" and switches 2, 3, 4, and 5 to "Off."
- Timed: The switch operates for a duration set by the Dip switch settings, ranging from 5 seconds to 120 seconds. This is selected by setting Dip switch 2 to "On," and then using a combination of switches 3, 4, and 5 to select the desired time.
- Time Settings (Dip Switches 3, 4, 5):
- 5 seconds: 3 Off, 4 Off, 5 Off
- 10 seconds: 3 On, 4 Off, 5 Off
- 20 seconds: 3 Off, 4 On, 5 Off
- 30 seconds: 3 On, 4 On, 5 Off
- 45 seconds: 3 Off, 4 Off, 5 On
- 60 seconds: 3 On, 4 Off, 5 On
- 90 seconds: 3 Off, 4 On, 5 On
- 120 seconds: 3 On, 4 On, 5 On
- Setting Light Function (Dip Switch 8):
- Light Blink (Switch 8 - On): Illuminates the switch pad once every four seconds, creating a "blinking" light effect.
- Light On O/P (Switch 8 - Off): The switch pad illuminates to mimic the time the toy is switched on, copying the output relay.
- Setting Vibration Function (Dip Switch 7):
- Vibration On (Switch 7 - On): The switch pad vibrates when pressed, providing tactile feedback.
- Vibration Off (Switch 7 - Off): Turns the vibration function off.
- Mounting: The Vibe-Lite includes a mounting bracket. An M4 x 16mm screw is used to secure the mounting plate, with the lip facing down.
Maintenance Features:
- Changing Batteries: The Vibe-Lite uses two AA batteries. When batteries are exhausted, remove the two battery bay covers using a cross-point screwdriver. Replace the old batteries with new ones, observing the correct polarity (+ on the battery to + on the Vibe-Lite), and then refit the battery bay covers.
- Battery Disposal Warning: Batteries should not be disposed of in household waste but must be taken to a suitable public disposal point.
- Warranty: The product comes with a one-year warranty from the date of purchase, covering defects in material and workmanship. To make a claim, notify Switch-Ed within 12 months of purchase and return the product within 30 days of notification. Switch-Ed will repair or replace the product if found defective.
- Exclusions: Defects caused by accidental damage, unreasonable use, damage from incorrect or leaking batteries, or if the product is resold are not covered.
- Claim Process: Contact Switch-Ed via their website (www.switch-ed.co.uk) for the latest contact details. Package the product securely, provide a description of the defect, attach proof of purchase, and ensure it arrives within 30 days of informing Switch-Ed.
General Warnings:
- Vibe-Lite should always be used under supervision, especially with children and users with special needs.
- It is designed for indoor use only and must not be used in wet or humid areas.
Need help?
To Next Page
General