Switch-Ed Vibe-Lite Switch - Using Vibe-Lite; Turning on

7
6
4. Plug in your switch adapted toy - see page 8
5. Set the light and vibration settings - see page 9 & 10
You are now ready to use your Vibe-Lite. Press the switch pad
to activate.
Turning On
1. Flip the Vibe-Lite over and expose the underside.
2. Turn on the power by sliding the toggle switch to the “On”
position using your nger. To switch “O” ip the switch back to
the original position.
3. Select the program by using a ball point pen - Flip the small
Dip switches to the required position using the illustration on
page 7. Detailed information about the Dip switch settings - see
page 11
2
3
L
M
M/L
45
3 74 81 5
10
2 6
20 on
o 
BL
on
T
Vib
Timed
Times in seconds
Latched
Momentary Direct
This switch must be off to
enable Momentary/Latch
functions
On
Off
Light
60
120
30 90
5
These switches
control the vibration
and light
Flip the
switches
to on/off
to select
the
required
program
Using Vibe-Lite
Using Vibe-Lite