Switch-Ed Vibe-Lite Switch - Changing Batteries

15
14
Vibe-Lite uses two AA batteries. When batteries are exhausted
replace by removing each of the two battery bays covers using
a cross point screwdriver and remove the batteries.
Fit the new batteries and ret the battery bay cover. (Observe
the correct polarity + on the battery to the + on the Vibe-lite)
Observe battery
polarity
Screws
!
WARNING
The batteries in Vibe-Lite should not be disposed
of in household waste but should be taken to a
suitable public disposal point.
Dip Switch Time Settings Changing the Batteries
3 74 81 52 6
3 74 81 52 6
3 74 81 52 6
3 74 81 52 6
On
On
On
On
Off
Off
Off
Off
Timer at 45 seconds
Timer at 90 seconds
Timer at 60 seconds
Timer at 120 seconds