9
8
Setting Light Function
The Light and Vibration options are selected by ipping Dip
switches 7 & 8.
Light Settings
Light Blink
Light On O/P
Switch 8 - On - This
illuminates the switch
pad once every four
seconds “blinking” light.
Switch 8 - O - This
setting copies the
output relay and
illuminates the switch
pad. An easier way to
describe it would be: it
mimics the time the toy
is switched on.
3 74 81 52 6
3 74 81 52 6
On
On
Off
Off
Connecting switch adapted toys
Most toys will work with the Vibe-Lite as long as they have a
3.5 mm jack socket tted. If your toy is tted with a 6.3 mm jack
socket (1/4 inch) you will need to purchase a jack adapter.
Technical: Vibe-Lite uses an internal volt free N/O (Normally
Open) relay to control toys and equipment. This makes it more
exible to use with all types of toys and equipment.
Switch Pad
Jack Socket
3.5mm Jack Plug
Using Vibe-Lite
To Next Page
Loading...