SWM Superdual 2021 - Stopwatch and Speed Readings

3 4 5
EN
EN - 13
3- SPEED / CLOCK / FUEL (figure 3)
- SPEED: 299 kmh or 299mph;
- CLOCK: Clock- reading from 0:00 to 23:59:59 (the
data will be lost after detaching battery);
To set clock, press the SCROLL button (A) for 3 sec-
onds or more to increase the hour; release button
and after 3 seconds the minutes can be increased.
4- SPEED / TRIP 1 / FUEL (figure 4)
- SPEED: 299 kmh or 299mph;
- TRIP 1: distance- maximum value: 999.9 km (the
data will be lost after detaching battery).
If the STP 1 is set to zero, the functions TRIP 1 and
AVS1 will also be set to zero.
The function TRIP 1 is ON together with the
function STP 1 (*).
(*): see gure 5
5- SPEED / STP 1 / FUEL (figure 5)
- SPEED: 299 kmh or 299mph;
- STP 1: miles/kilometers covered time
- Reading from 0:00 to 23:59:59 (the data will be
lost after detaching battery).
To activate the function STP 1, push the knob SCROLL
(A) for more than 3 seconds.
- 1st step: function ON;
- 2nd step: stop counters;
- 3rd step: reset STP 1, TRIP and AVS 1 data;
- 4th step: activate function;
- 5th step: stop counters
.............................
and so on
NOTE
STP 1 data + TRIP 1 data = AVS 1 (*).
(*): see figure 6