B
A
1
2
EN
EN - 47
BRAKE HYDRAULIC SYSTEM BLEEDING
It is very important to do this at the intervals stated
on the “Scheduled Maintenance Chart”. Carry out
the operation even if the lever or the control pedal
free play increases.
Note*:
The braking system bleeding operation must be per-
formed at a SWM service centre, using the relevant
bleeding fittings (1) and (2).
WARNING*:
Periodically check the connecting hoses (see
“Scheduled Maintenance Chart”): if the hoses (A)
and (B) are worn or cracked, their replacement
is advised.
To Next Page
Loading...
