Installation
30
2.
1.
Connect the motor cable
Connect the pedal
sensor and base display
1.1
To connect the waterproof connector,
find the arrow on each connector and
align. Once aligned, push the connector
pair together until no colour is visible.
The cable connectors are colour coded.
The tall end of the connector connects
with the short end.
2.1 2.2Connect the motor to the handlebar
mount.
To connect the waterproof connector,
align the arrows and push together
until the arrows touch on both cables.
Secure the motor cable to the fork
with the cable ties provided. Leave
enough slack for the handlebars to
turn.
No colour visible
To Next Page
Loading...
