Swytch eBike Conversion Kit - Battery Check and Settings

Using Your Kit
43
3.
Power Pack Settings
1.
2.
3.
This is how to access and adjust the
settings in the Power Pack.
Press and hold the
up and down arrows
together to access
the settings.
In the settings mode,
use the up and down
arrows to change the
values.
Press the middle button to confirm the
value and move onto the next setting.
Once activated, the battery
indicator will start flashing.
4.
To exit the settings
hold down the middle
button, confirming the
new values.
Factory reset
PAS direction
Power limit
Top speed
Wheel size
The power level light
indicates which value is
selected.
The flashing battery light indicates
which setting you’re adjusting.