50
Motor Wheel isn’t Spinning Freely2.
Ensure that the brakes are adjusted
correctly and aren’t touching the
rim.
Next, check if the motor casing is
touching the forks. If it is, you need
to increase the gap between the
forks. The best way to fix this is to
add a washer to the axle as shown.
Alternatively, move the torque
washer inside the forks instead of
the washer.
The torque washer will push the
forks out, so you may need to apply
some pressure to seat the fork over
the torque washer.
Washer fitted
inside fork
Torque washer
fitted inside fork
1.1
1.2
1.3
Troubleshooting
To Next Page
Loading...
