Using Your Kit
42
2.1
3.1
2.2
Press down the middle button on
the display to turn it on.
Select your power level by
pressing the up and down arrows on
the display.
2.
Setting your power level
3.
Test your kit with walk mode
On/off
Power up
Battery level
Power level
Power down
While lifting the front wheel off the
floor, press and hold the down button
on your display. The front wheel
should spin, showing that the Kit has
been connected successfully.
Press
and
hold
Check your wheel size is correct
before your first ride, don’t ride
your kit with the incorrect wheel
size configured.
!
To Next Page
Loading...
