4
Tighten up before riding
Whether it’s your first ride or your hundredth ride, please ensure all nuts, screws and bolts
are tight before taking off on the road. Any loose parts could result in the motor wheel
coming off while riding - please be careful. Every 100 km, check your wheel spokes are
tight to ensure that the wheel remains secure.
Maintain your bike
For a safe ride on any bicycle, it’s important that the bike is well-maintained and in good
working order. Regularly check and maintain the condition of your bike.
Placing any metallic or conductive objects into the charge port other than the
charger may cause electric shock, fire or other injury. Don’t connect the charger if water,
ice or condensation is in the charge port.
Before you ride your Swytch Bike for the first time, please be sure that it has been cor-
rectly assembled. You’ll find step by step instructions in this manual. For further help and
support visit our help centre - support.swytchbike.com
Spares
Only genuine replacement parts for safety-critical components must be used. There are no
consumables or lubricants necessary for the Swytch Kit. Please contact our help centre for
more information about spares.
Warnings
Throughout the manual these callouts warn about situations that could cause death,
serious injury and/or heavy material damage if you don’t follow the safety
instructions.
Get in touch
Before you ride your Swytch Bike for the first time, please be absolutely sure that it has
been correctly assembled. You will find step-by-step instructions in this manual. For
further help and support visit our help centre here - support.swytchbike.com.
!
Introduction
To Next Page
Loading...
