1 . Operating features of the instrument
- The instrument has two operating modes: basic functions (direct access) and advanced functions. In addition
to the conguration functions, 2 working reference functions can be accessed, in MIN, MAX and DELTA (TIR)
mode, plus tolerance dispay or input of multiplication factor other than 1:1 (see chaps. 3 and 4)
- The «favourite» key gives direct access to the function used most often (see chap. 6)
- Sets a Preset value, reset the MIN/MAX mode, veries a selection, and controls switching off the instrument.
By default, SIS mode enables automatic switch-off with no loss of origin (see chap. 7)
- Personalising the functions
It is possible to activate or de-activate certain functions of the instrument via RS232 (see chap. 9)
- Data transmission parameters
4800Bds, 7 bits, even parity, 2 stop bits
2. Start
Press a button.
To Next Page
Loading...
Need help?
General
