13
E
Connection :
1° Activate
Bluetooth
®
compatible software and hardware (Master : PC, Display Unit).
2° Start the instrument. By default the
Bluetooth
®
module is active and the instrument is available for connection (advertising
mode).
3° If no connnection is established during the advertisement period reactivate the
Bluetooth
®
module using the bt / On menu.
4° Instrument is ready to communicate (connected mode.)
Only with paired profile :
Pairing with master is automatically done at first connection.
To connect the instrument to a new master (new pairing), pairing information on the instrument must be cleared using the bt /
rESEt menu.
Three Bluetooth
®
profiles are available.
SIMPLE Profile without pairing (default).
PAIr Paired and secured profile.
HId Virtual keyboard mode (compatible with recent equipement without driver installation).
Note:
- Bluetooth
®
pairing information is cleared when the profile is changed.
To Next Page
Loading...
