Sylvac S Dial WORK Smart - Page 12

12
E
6. Bluetooth
®
configuration (depending on model)
The connection procedure has been designed to be simple and is signalled by the following three states:
° Symbol off ............. disconnected mode
° Symbol blinking ...... advertising mode
° Symbol on .............. connected mode
- It is also possible to display the tolerance limits when the instrument is operating in MIN, MAX or DELTA (TIR) mode.
- If no tolerance limits have been defined by the user, the instrument will only display the tolerance limit indicators
but will not turn on the indicator lights (red - green - yellow).
OK
The following options can be selected to control the Bluetooth
®
module.
On Enable Bluetooth
®
module (start advertising mode).
OFF Disable Bluetooth
®
module (terminate active connection).
rESEt Clear pairing information.
MAC Display the MAC (Media Access Control) address.