EN
1. Maintenance
Store the instrument in a dry place to avoid corrosion of metal parts if
not used for a long time.
Do not press the movable key on the anvil: leave a gap of 1-2mm when
the instrument is not in use.
Do not use aggressive products (alcohol, trichloroethylene or other
aggressive liquids) to clean plastic parts.
Do not store the instrument in a place exposed to sunlight, heat or
humidity.
Important: in the event of liquid splashes, wipe off the metal parts
of the instrument to ensure proper mechanical operation and avoid
corrosion problems.
To Next Page
Loading...
Need help?
General
