Stop playback
To stop playback, press the M- / button on the unit. The total number of tracks of the
CDs / MP3 Disc / USB will be displayed.
Skip track
During playback, tune the TUN+ / or TUN- / controls to skip to the next or previous
tracks.
High-speed music search
During playback, tuning and hold the TUN+ / or TUN- / controls to skip/search
through the current track at high speed in forward or backward directions. When the TUN+ /
or TUN- / controls are released, normal playback speed will be resumed
immediately.
+10 / FOLDER+ skip control
During playback, press the +10 / FOLDER+ button to skip to next folder. Press and hold the
+10 / FOLDER+ button to skip up by 10 tracks if destination track is inside the folder.
Repeat playback modes (Repeat 1 / Repeat Folder / Repeat all)
During playback, press the P-MODE / MEM button until the REP1 icon is displayed to
select the current track to be repeated. The selected track will be repeated continuously.
Repeat the Current Track
Repeat All Tracks
During playback, press the P-MODE/ MEM button until the ALL icon is displayed. All
tracks/files on the CDs / MP3 Disc/ USB will be repeated continuously.
Repeat Folder (for MP3 disc only)
During playback, press the P-MODE/ MEM button until the FOLDER icon is shown on the
display. All tracks/files inside the desired folder will be repeated continuously.
Note: REPEAT FOLDER – this function is not available for normal music CD.(Only for MP3
Disc / MP3 files on USB flash-drive)
Programmed CDs / MP3 Disc / USB playback
Return to normal playback
Press the P-MODE/ MEM button until NO repeat indicator is displayed. The normal
playback will be resumed.
This unit can be programmed to play up to 20 tracks in CD / USB mode. Load the music CD
disc onto the CD compartment.
1. Press P-MODE/ MEM button once in the stop mode. “P-01” will be shown on the display
and blinking.
2. Tune the TUN+ / or TUN- / controls to select the desired track to be
programmed.
3. Press P-MODE/ MEM button again to confirm the selected track.
6
To Next Page
Loading...
