C
charles05Sep 10, 2025
Why is there no DTS audio output from my Sylvania SSD803?
- SshirleyrobertsonSep 10, 2025
This player does not support DTS audio. This is not a malfunction.
To Next PageTo Next PageWhy is there no DTS audio output from my Sylvania SSD803?
This player does not support DTS audio. This is not a malfunction.
Why does the Sylvania SSD803 remote control not respond?
There could be several reasons why the remote control isn't working. First, check if the power plug is connected to an AC outlet. Next, check the batteries in the remote control and replace them if necessary. Ensure you are aiming the remote control directly at the remote sensor from within 23 feet, removing any obstacles in the way. Also, verify that the correct mode (DVD or VCR) is selected on the remote control. Finally, check if a cassette tape is in the VCR.
What to do if there is no sound from my Sylvania DVD VCR Combo?
If you're not getting any sound, start by checking that the audio cables are firmly connected. Make sure the power to your audio component is on. Verify that the audio output settings are correct and that the input settings on the audio component are also properly configured.
Why are TV programs not seen normally on my Sylvania DVD VCR Combo?
If you're having trouble viewing TV programs, begin by re-checking the ANT. IN and ANT. OUT connections. Press the VCR/TV button. Ensure the unit is in VCR mode by pressing VCR on the remote and verifying that the green VCR OUTPUT light is lit. Then, set it to the TV position by pressing VCR/TV again.
What to do if my Sylvania DVD VCR Combo disc cannot be played?
If a disc cannot be played, first, make sure the disc is inserted correctly with the label side up. If it is, try cleaning the disc. Also, check if the parental lock is enabled and, if so, cancel it or change the control level.
What to do if I cannot go into Record mode on my Sylvania SSD803?
To enable Record mode, first, check if the tape has a safety tab. If there is a hole, cover it with cellophane tape. Ensure the player is in VCR mode by pressing the VCR button on the remote control until the green VCR OUTPUT light is lit.
Why does the “Prohibited icon” appears on the screen, prohibiting an operation on my Sylvania DVD VCR Combo?
That operation is prohibited by the player or the disc. This is not a malfunction.
Why is the picture distorted on my Sylvania SSD803 DVD VCR Combo?
Connect the player directly to the TV. Note that slight distortions can occur and do not necessarily indicate a malfunction. Also, occasional brief pauses in the picture are normal.
Why does video or color fade in and out when making a copy of a video tape on my Sylvania SSD803 DVD VCR Combo?
You are likely trying to copy a copyrighted video tape. The fading is due to copy guard protection.
What to do if I cannot view a tape but the audio is OK on my Sylvania SSD803 DVD VCR Combo?
Head cleaning may be necessary. Also, make sure the VCR is not in the Menu mode.
Details on safe handling and operation of laser components.
Information on FCC regulations and managing radio frequency interference.
Comprehensive guidelines for safe operation, maintenance, and handling.
List of items provided with the DVD/VCR unit.
Explanation of symbols used in the manual for VCR, DVD, CD, MP3, and QUICK modes.
Capabilities and functions for both DVD and VCR operation modes.
Guidelines for safe placement, electrical hazards, and environmental factors.
List of compatible discs and their data organization.
Identification and functions of front panel and remote control buttons.
Identification of input/output jacks on the rear panel and their uses.
Explanation of indicators and messages shown on the screen.
Instructions for inserting AA batteries into the remote control.
How to switch between VCR and DVD modes using the remote or front panel.
Connecting to TVs with and without A/V terminals, and RF output settings.
Connecting to TVs with advanced inputs and stereo amplifiers.
Connecting to Dolby Digital receivers and analog audio systems.
Automatic and manual channel scanning and setup.
Setting the clock and changing the on-screen language.
Normal playback, slow motion, and various search methods.
Instructions for OTR, timer, and normal recording.
Copying tapes and using the MTS sound system.
Starting playback, pause, and general disc features.
Navigating disc menus, searching, and resuming playback.
Advanced playback controls like zoom and specific searches.
Setting repeat modes and programming track sequences.
Playing random tracks, MP3 files, and selecting tracks.
Adjusting audio, subtitle languages, and camera angles.
Customizing screen displays and setting parental controls.
Configuring audio, dynamic range, and setting disc markers.
Adjusting picture brightness, display options, and sound effects.
Choosing languages for audio, subtitles, and menus on discs.
Troubleshooting guide for common operational issues with the DVD/VCR.
Instructions for unit cleaning, servicing, auto head cleaning, and disc care.
Technical details of the DVD/VCR unit.
Details of the limited warranty, parts, labor, and exclusions.
Details on safe handling and operation of laser components.
Information on FCC regulations and managing radio frequency interference.
Comprehensive guidelines for safe operation, maintenance, and handling.
List of items provided with the DVD/VCR unit.
Explanation of symbols used in the manual for VCR, DVD, CD, MP3, and QUICK modes.
Capabilities and functions for both DVD and VCR operation modes.
Guidelines for safe placement, electrical hazards, and environmental factors.
List of compatible discs and their data organization.
Identification and functions of front panel and remote control buttons.
Identification of input/output jacks on the rear panel and their uses.
Explanation of indicators and messages shown on the screen.
Instructions for inserting AA batteries into the remote control.
How to switch between VCR and DVD modes using the remote or front panel.
Connecting to TVs with and without A/V terminals, and RF output settings.
Connecting to TVs with advanced inputs and stereo amplifiers.
Connecting to Dolby Digital receivers and analog audio systems.
Automatic and manual channel scanning and setup.
Setting the clock and changing the on-screen language.
Normal playback, slow motion, and various search methods.
Instructions for OTR, timer, and normal recording.
Copying tapes and using the MTS sound system.
Starting playback, pause, and general disc features.
Navigating disc menus, searching, and resuming playback.
Advanced playback controls like zoom and specific searches.
Setting repeat modes and programming track sequences.
Playing random tracks, MP3 files, and selecting tracks.
Adjusting audio, subtitle languages, and camera angles.
Customizing screen displays and setting parental controls.
Configuring audio, dynamic range, and setting disc markers.
Adjusting picture brightness, display options, and sound effects.
Choosing languages for audio, subtitles, and menus on discs.
Troubleshooting guide for common operational issues with the DVD/VCR.
Instructions for unit cleaning, servicing, auto head cleaning, and disc care.
Technical details of the DVD/VCR unit.
Details of the limited warranty, parts, labor, and exclusions.
General| Brand | Sylvania |
|---|---|
| Model | SSD803 |
| DVD Type | DVD player |
| Remote Control | Yes |
| Video Formats | NTSC |
| Output Resolution | 480i |
| Type | DVD / VCR Combo |
| Playable Media Format | DVD, VHS |
| Region Code | 1 |
| Connectivity | Composite Video Output |
