Sym JOYRIDE 125 User Manual

9
y Light Switches
When the switch is turned to this position as the
engine is being started, headlight, rear light,
instrument panel light, and position light will come on.
When the switch is turned to this position as the
engine is being started, rear light, instrument panel
light, and position light will come on.
When the switch is turned to this position, all lights
will go off.
• Engine Stop Switch
Switch to this position to turn off the engine when a state of emergency.
Switch to this position and the engine can be started.
• Electrical Starter Button
This is a starting motor button (switch) for engine starting.
With the main switch "ON", press this button while holding the front or rear brake lever will
start the engine.
• High/Low Beam Switch
This is the high and low beam of headlight switching switch. Press this switch to switch between high
and low beams.
This is for high beam.
This is for low beam. (Please turn to low beam when riding in city)
• Passing Switch
Turn ignition switch “ON” and press this button down. Then, the high beam of headlight
will come on immediately to warn the driver of the vehicle ahead that you intend to
overtake him/her. (For overtaking, high beam indicator will come on at this time) This
button will return to original position after releasing
• Seat open Switch ( For LA18w-6 only)
Turn ignition switch “ON” and press this button down. Then, the seat will unlock
immediately. This button will return to original position after releasing.
• Horn Switch
Press this button down when ignition switch is
in the “ON” position, the horn will sound.
Note:
Position Light Function:
This light can indicate the
motorcycle’s position when the
motorcycle is running in dim, rainy, or
foggy weather.
CAUTION:
• Release this button immediately after engine has been started, and never press the button again
to avoid damaging the engine.
• This mechanism is a safety design. The engine can only be started after the front or rear brake
lever (pedal) has been applied.
• Do not use light system. Turn headlight and turn signal lights to the “OFF” position when the
engine is being started.
PASSING
CAUTION:
Do not press this button when you are in
the area where there’s no honking.
SEAT OPEN

Sym JOYRIDE 125 Specifications

General

Displacement	124.6 cc
Fuel System	Electronic Fuel Injection
Transmission	CVT
Front Suspension	Telescopic fork
Rear Suspension	Unit Swing
Front Brake	Disc
Rear Brake	Drum
Length	1900 mm
Engine Type	4-stroke
Cooling System	Air-cooled