SYMA X26 - Main Specifications; Troubleshooting Guide

-12-
Main Specifications
131mm 131mm
44.5mm
131mm
TroubleShooting
Problem Reason Solution
Balance calibration is needed.
Numerous crashes.
Re-set forward direction.
Please relate to page
number 8.
Perform balance calibration.
Please relate to page number 7.
Drone length:131 mm Motor Size:Ø7
Drone width:131 mm Battery:3.7V 380mAh
Drone height: 44.5 mm
The drone does
not respond.
1.The drone has activated
low-voltage battery protection.
2.The transmitter’s battery is low,
1.Recharge the drone’s
battery.
2.Change the transmitter’s
1.The transmitter battery is low.
2.There is another transmitter with
the same frequency causing
1.Change the transmitter’s
battery.
2.Please change flying
1.Perform balance calibration.
Please relate to page number 7.
2. Avoid flying the drone in
severe weather conditions
(strong wind, rain, snow, fog,
thunder etc.)
3.Perform balance calibration.
Please relate to page number
7.location.
The transmitter
sticks are not
sensitive.
The drone is
unstable when
hovering or quickly
drifts in one
direction.
When in headless
mode the forward
direction deviates.
The drone does
not hold the set
altitude.
1.Balance calibration is needed.
2.Flying the drone in severe
weather.
3.Heavy crash impacts gyroscope
calculations.