-8-
RE-START FUNCTION
Press the power switch to turn on
the transmitter.
Restart function:
To return the transmitter to factory settings, please follow the steps below.
Press the power switch to turn on the quadcopter.
When the quadcopter indicator quickly flashing
to slowly flashing,please push the throttle lever to
the highest position,and then pull it back to the
lowest position. Then the quadcopter indicator
changed from slowly flashing to normal lights up.
Place the quadcopter on a horizontal position,
then push transmitter both left and right lever to
lowest right corner for about 2-3 second ,
indicator on the quadcopter changed from normal
lights up to quickly flashing ;After 2-3 second ,the
indicator changed to normal lights,it means the
quadcopter restarted /reset successfully.
HEAD FREE FUNCTION
1. Turn on power switch of remote control.
2. After aircraft connects with power supply, place the
switch in “ON” position, adjust the direction pointed
by aircraft’s handpiece and regard it as the dead
ahead in headless situation.
3. Push the accelerator’s push rod of remote control to
the highest point and pull back to the lowest point.
When remote control pops, it indicates that
frequency modulation and forward definition have
already finished.
Front
Read
Left Right
To Next Page
Loading...
