To view drive details
1
On the Advanced page, on the Content Bar, click the Drives tab.
If the Advanced page is not visible on the Primary Navigation Bar, click View
> Show Advanced Page.
2
In the Drive column, select a drive.
3
Review the Details section below the Drives table.
Improving the protection level of a drive
When the status of a drive-based backup indicates that it needs attention, you
should take steps to improve the status.
You might need to add a drive to an existing backup, modify the schedule of a
backup, edit the settings of a backup, or define a new backup.
See “Best practices for backing up ” on page 48.
115Monitoring the status of your backups
Improving the protection level of a drive
To Next Page
Loading...
