To create a new file type and extensions
1
On the main menu bar, click Tasks > Options.
2
Click File Types.
3
At the bottom of the File types list, click the Add a file type (+) button to add
a file type category.
4
Type a descriptive name of the new file type category, and then press Enter.
5
At the bottom of the Extensions for list, click the Addan extension (+) button,
and then type an asterisk (*) and a period, followed by the extension of the
file type you want to define, and then press Enter.
6
Click OK.
To edit a file type and extensions
1
On the main menu bar, click Tasks > Options.
2
Click File Types.
3
Select a file type from the File types list, and then do one of the following:
■ Click the Rename a file type button (at the right of the - button) to edit
the name of the selected file type.
■ Select an extension in the Extensions for column and click the Rename
an extension button (at the right of the - button) to edit the name of the
extension.
■ Click either the Restore default file types list or the Restore default
extension list button to restore all default file types or extensions.
Caution: Any file types and extensions you have set up are removed. Once
removed, you will have to add them again manually.
4
Click OK.
To delete a file type (and all of its extensions)
1
On the main menu bar, click Tasks > Options.
2
Select a file type in the File types column.
You cannot delete a default file type. You can delete all but one extension of
a default file type, and you can add additional extensions to a default file type.
3
Click the Remove a file type (-) button , and then click OK.
Use this same procedure to remove file extensions from the Extensions for
list.
Getting Started
Configuring Norton Ghost default options
40
To Next Page
Loading...
