Symantec Veritas Cluster Server - Page 127

# vssat deletecred --domain type:domainname \
--prplname prplname
For example:
# vssat deletecred --domain vx:root@RB2.brokers.example.com \
--prplname saturn.nodes.example.com
Configuring the authentication broker on node saturn
Configure a new authentication broker (AB) on node saturn. This AB belongs to
root broker RB1.
To configure the authentication broker on node saturn
1
Create a principal for node saturn on root broker RB1. Execute the following
command on root broker RB1.
# vssat addprpl --pdrtype root --domain domainname \
--prplname prplname --password password \
--prpltype service
For example:
# vssat addprpl --pdrtype root \
--domain root@RB1.brokers.example.com \
--prplname saturn.nodes.example.com \
--password flurbdicate --prpltype service
2
Ensure that there is no clock skew between the times on node saturn and RB1.
3
Copy the /opt/VRTSat/bin/root_hash file from RB1 to node saturn.
127Adding and removing cluster nodes
Adding a node to a cluster