Table A-3
Response file variables (continued)
DescriptionVariable
List of keys to be registered on the system.
List or scalar: list
Optional or required: optional
$CPI::CFG{KEYS}
{SYSTEM}
Mentions the location where the log files are to be
copied. The default location is /opt/VRTS/install/logs.
List or scalar: scalar
Optional or required: optional
$CPI::CFG{OPT_LOGPATH}
Performs the configuration if the RPMs are already
installed using the -installonly option.
List or scalar: scalar
Optional or required: optional
$CPI::CFG{CONFIGURE}
Defines the NIC to be used for a private heartbeat link
on each system. Two LLT links are required per system
(LLTLINK1 and LLTLINK2). Up to four LLT links can be
configured.
List or scalar: scalar
Optional or required: required
$CPI::CFG{VCS_LLTLINK#}
{SYSTEM}
Defines a low priority heartbeat link. Typically,
LLTLINKLOWPRI is used on a public network link to
provide an additional layer of communication.
List or scalar: scalar
Optional or required: optional
$CPI::CFG{VCS_LLTLINKLOWPRI}
{SYSTEM}
Defines the domain-based hostname (example:
smtp.symantecexample.com) of the SMTP server to be
used for Web notification.
List or scalar: scalar
Optional or required: optional
$CPI::CFG{VCS_SMTPSERVER}
List of full email addresses (example:
user@symantecexample.com) of SMTP recipients.
List or scalar: list
Optional or required: optional
$CPI::CFG{VCS_SMTPRECP}
169Advanced VCS installation topics
Performing automated VCS installations
To Next Page
Loading...